在面粉石磨機的生產中，有效去除原糧中的雜質已成為提高成品質量的關鍵步驟，但如何才能提高清理效果呢？

In the production of flour stone mill, effectively removing impurities in raw grain has become a key step to improve the quality of finished products, but how to improve the cleaning effect?

經面粉石磨機加工的生麥粒必須干凈、除雜。如果小麥中所含的各種雜質不能去除，就會大大影響面粉的加工效果，面粉的品質和口感會大打折扣，雜質也會影響面粉石磨機的使用壽命。如果不去除其中的雜質，就不會造成傷害。

The raw wheat grains processed by the flour stone mill must be clean and impurity free. If all kinds of impurities contained in wheat cannot be removed, it will greatly affect the processing effect of flour, greatly reduce the quality and taste of flour, and the impurities will also affect the service life of flour stone mill. If the impurities are not removed, no harm will be caused.

在面粉石磨機的清洗過程中，一些會造成設備損壞的雜質要清理干凈，比如麥秸、石子、碎石、磚塊、鐵等，這些大的雜質對面粉廠的危害更大，雜質設備，需要盡快清洗。。

In the cleaning process of flour stone mill, some impurities that will cause equipment damage should be cleaned up, such as wheat straw, stone, gravel, brick, iron, etc. these large impurities are more harmful to the flour mill. The impurity removal equipment needs to be cleaned as soon as possible..

其次，去除了與原顆粒工藝特性有很大差異的雜質。然后，對與小麥技術特性差別不大的雜質進行處理，更復雜的雜質常在此提及。在生麥粒進入自動磨粉機之前，先用磁選機小麥中的鐵等，防止硬質雜質對磨粉機造成傷害。

Secondly, the impurities that are very different from the process characteristics of the original particles are removed. Then, the impurities with little difference from the technical characteristics of wheat are treated, and more complex impurities are often mentioned here. Before the raw wheat grains enter the automatic pulverizer, first use the magnetic separator to remove the iron in the wheat to prevent the hard impurities from damaging the pulverizer.

為保證加工過程中進入面粉石磨機的原糧的純度和質量，在加工前原料進入設備前必須去除各種雜質，但去除的是各種粉塵和芥末雜質，特別是用于生產和產品。對純度影響的各種無機雜質。

In order to ensure the purity and quality of the raw grain entering the flour stone mill in the processing process, various impurities must be removed before the raw materials enter the equipment before processing, but the focus of removal is all kinds of dust and mustard impurities, especially for production and products. Various inorganic impurities that have the greatest impact on purity.

對于面粉石磨機來說，如果與原糧有兩種以上的雜質，當有不同的雜質時，應采用更簡單、更有效的方法去除，以減少工作時間。例如，對于粒度明顯大于或小于原粒的砂石，其篩分效果優于去石機。

For the flour stone mill, if there are more than two kinds of impurities with the raw grain, when there are different impurities, a simpler and more effective method should be adopted to remove them, so as to reduce the working time. For example, the screening effect of sand and stone with particle size significantly larger or smaller than the original particle is better than that of stone remover.

另外，操作者需要注意的是，面粉石磨機的重要配件需要檢查篩板和篩面很重要，需要經常清洗。

In addition, the operator should note that the important accessories of the flour stone mill need to be checked. The sieve plate and sieve surface are very important and need to be cleaned frequently.

面粉石磨機有效的原糧中的雜質的相關內容便是這樣了，如果您還有什么問題的話就來網站m.17101.cn進行咨詢吧。

This is the relevant content of flour stone mill to effectively remove impurities in raw grain. If you have any questions, please visit m.17101.cn Com.